The Philippine Agricultural Mechanization Journal is published quarterly by the Agricultural Mechanization Development Program, Institute of Agricultural Engineering, College of Engineering and Agro-Industrial Technology, University of the Philippines Los Banos
The Philippine Agricultural Mechanization Journal is a non-refereed journal which aims to serve as a national venue for the dissemination of information on recent research and development in the field of agricultural mechanization, agricultural engineering and related fields.
Design and Development of a Dilute-Phase Flow Pneumatic Dryer for Agricultural By-Products
ABSTRACT
A pneumatic or flash dryer for agricultural products/by-products was designed, fabricated and tested for drying 'sapal' (coconut meat residues) and ipil-ipil leaves. It is a semi-open drying system where part of the exhaust air is recirculated by a fan mounted on top of the drying chamber. The flow of the centrifugal type-fan is controlled by the rpm of its shaft. Air is heated as it passes through a 6 spiral-type electric resistance heaters with a maximum heating capacity of 6.81 KW. Each heater has a switch to manually control drying air temperature. The particulates are fed at constant rate into the lower part of the dryer by a screw auger. The particulates are carried upward by the flowing hot air stream. The hot air stream causes the particulates to be suspended and ultimately be carried along and dried at the same time. The drying section is alternately made of stainless steel cylinders of varying sizes. The total length of the dryer is 275 cm. A cyclone is provided at the discharge end of the dryer to serve as collector of the dried product.
The fabricated pneumatic drying system demonstrated that it can be used to dry agricultural by-products such as sapal and to dehydrate plant parts such as ipil-ipil leaves at high-temperatures at a short-time duration. The study initially tested the functionality of the machine. Thus, further tests must be done to investigate the effects of drying at high-temperatures on quality of product. Further, the economics of the machine and its multi-product applications must be evaluated.
Keywords: pneumatic dryer, flash dryer, ipil-ipil, sapal
Engineer IV, AMDP, Institute of Agricultural Engineering, College of Engineering and Agro-Industrial Technology, University of the Philippines Los Banos, Philippines.
For FREE COPY of the paper, please email:
The Managing Editor
AMDP, IAE, CEAT
University of the Philippines Los Banos
College, Laguna 4031 Philippines
e-mail address: mariavictorialarona@yahoo.com
